Question 1: When the contact surface between the fixed ring and the moving ring of the internal mixer is uneven, and the sealing oil film cannot be formed, how should we deal with it?
Treatment method: disassemble the internal mixer and check the fixed ring. If the drag contact surface is not damaged, but the contact rate is low, it needs to be run-in. The run-in time is more than 4-8h.
Question 2: There are hard particles between the moving ring and the fixed ring of the banburying, which will damage the contact surface and prevent the contact surface from forming a sealing oil film. What should we do at this time?
Solution: Replace the moving coil, then set it, and run the moving coil for several hours.
In fact, the quality of our internal mixer is very good. As long as we pay attention to daily maintenance, keep clean and the presence of industrial lubricants, and pay attention to the use, there will be few failures. We also have Dispersion Kneader on sale, if you are interested in this, you can contact us.
We are a professional manufacturer of Extrusion Pelletizer, with many years of experience and mature technology, and a large inventory, welcome to visit our website.
